Recovery or Storage

Moving Non-Runners or Accident Damaged Vehicles

Professional Equipment Designed for the Home Mechanic

A Range of High Quality Dollies and Skates

We manufacture a high quality range of tools for Domestic and Professional Workshops. Our Standard Dollies have been popular with customers over many years. They are a tried and tested design, braced at the side and supplied with good quality wheels. Our dollies are rated at 450kg each, can take up to 355mm wide tyres, have 3.75" cast iron wheels with double ball bearing swivels which are each located into 4 lugs but only need to be secured by one bolt.

To use the dollies, employ a jack to raise the car and slide the dollie under the wheel. A pair of dollies will allow a car to be turned through 90 degrees, a set allow the vehicle to be turned on its' axis. Often used to squeeze three cars into a space designed for two!

Our Hydraulic, foot-pump operated, Vehicle Skates - HyJacks - come into there own when you need to move an imobile vehicle or when you’re stuck for space. If you want to turn a vehicles on their axis, want to squeeze them together in a small garage, push a heavy car around the workshop or to just where you need it in the pits, HyJacks are the ideal solution.

HyJacks are manufactured from quality steel, with 12" steel rollers, they are robust and built to last. The sturdy wheels are mounted on bearings and designed not to get jammed by stones when moving vehicles on Tarmac or Concrete outside. They are all supplied with brakes, invaluable if storing a vehicle on the slightest slope, have locking pins to allow extended storage and can each support 680kg.

Open HyJack to its' full extent then place around wheel then tighten valve

Use foot pump to raise car off the ground and insert safety pin





Now move the car